Colibri VF61
The Colibri VF61 is a SODIMM sized computer module based on the NXP®/Freescale Vybrid embedded system-on-a-chip. The Cortex A5 CPU core peaks at 500 MHz and an additional M4 core runs at 167Mhz. The module delivers cost effective CPU and graphic performance with minimum power consumption.
하이라이트
Powered by NXP®/Freescale Vybrid Processor: VF6xx Heterogeneous Multi-core
The Colibri VF61 is a SODIMM-sized computer module based on the NXP/Freescale Vybrid embedded System-on-Chip (SoC). The Arm Cortex-A5 CPU core peaks at 500 MHz and an additional M4 core runs at 167 MHz. The module delivers cost effective processing and graphics performance with minimal power consumption.
The NXP/Freescale VF6xx SoC possesses a heterogeneous/asymmetrical multi-core architecture. The two cores – Arm Cortex-A5 and Arm Cortex-M4 – can concurrently run different operating systems. This SoC architecture is ideal for applications with diverse real-time & mixed-criticality requirements in which the Arm Cortex-A5 runs a conventional OS such as Linux supporting UI and high throughput requirements while the Arm Cortex-M4 runs a RTOS for real-time tasks.
Traditionally, real-time and non-real-time requirements are often handled by separate processors on separate chips. Microcontrollers are often used for real-time tasks while microprocessors perform less time critical high-level tasks. Such an architecture has significant inter-chip communication over-head and suffers from duplicate resources & interfaces. In heterogeneous multi-core architectures, different processing cores are placed on a single silicon die. This allows the Colibri VF61 to provide a fast multi-core communication channel, inter-processor interrupts and shared resources and devices.
Check out the video on asymmetrical multicore processing for reliable, complex embedded systems, here
Heterogeneous Multi-core: Ideal for real-time Applications
The Colibri VF61 is ideal for simple Human Machine Interfaces (HMI) in appliances and industrial machines, secure control of infrastructure and manufacturing equipment, energy conversion applications (such as motor drives and power inverters), ruggedized wired and wireless connectivity, and control of mobile battery-operated systems such as robots and industrial vehicles. Due to the asymmetrical multi-core support, Colibri VF61 can be used in a variety of real-time applications.
Colibri VF61 is a reference platform for Qt for Device Creation. For more details, check here
Easy Performance Upgrade
Existing customers will benefit from an extremely easy migration path between the current Colibri iMX6, Colibri PXAxxx or Colibri Txx module range to the Colibri VF61 – all Colibri modules are electrically pin compatible. New customers will also appreciate the ability to select the Colibri module most suitable for their application to achieve the optimum price/performance balance without the need to support different carrier board designs.
Latest Information on Colibri VF61
You can find the latest information on Colibri VF61 at the Toradex Developer Center
Toradex Developer Center운영 체제
Toradex offers free support and maintenance for Windows Embedded Compact and Embedded Linux on the NXP®/Freescale Vybrid VF6xx Computer on Module - Colibri VF61. This allows system designers to focus the application only, instead of focusing also on the OS and low-level device drivers.
Toradex carries out in-house development and maintenance of a Yocto project-compatible production-quality Embedded Linux BSP. Our extensive documentation and support makes sure your product reaches market in time. Full source code and Toradex developments are up-streamed into mainline.
Windows Embedded CE 6.0, Windows Embedded Compact 7 and 2013 are supported on Colibri VF61. The development and maintenance is carried out in-house by Toradex. WEC allows you to use Microsoft .Net Compact Framework and Visual Studio.
캐리어 보드
캐리어 보드는 CoM에 필요한 신호 및 전력 수준을 제공합니다. 또한 USB, 이더넷, UART 및 HDMI와 같은 응용 프로그램별 연결 및 멀티미디어 인터페이스를 제공합니다.
SBC와 캐리어 보드에 대해 자세히 알아보기액세서리
Toradex는 최종 제품에 직접 사용할 수 있는 완제품 액세서리를 제공합니다. 이러한 액세서리 중 일부에 대한 설계 파일에는 조립 도면, 회로도 및 Altium 프로젝트가 포함되어 있습니다.
Toradex는 웹샵에 나열된 주변 기기를 테스트하고 카메라, 모뎀, 디스플레이, 센서 등의 공급업체와 직접 협력하여 Toradex SoM과의 통합을 가능한 쉽게 만듭니다.
- 1 Fastener bag contains 100 Fasteners
- Touch: 4-Wire Resistive Touch
- 40 pin FFC cable (250mm) to connect it with a Carrier Board
- No special drivers required
- 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
- Atmel touch driver
- Plug and Play (Windows Compact Embedded 6/7 compatible)
- BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
- WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
- Can be setup as a ad-hoc network via peer to peer communications
- Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
- No external power supply required
- Compatible with Colibri Evaluation Board and Apalis Evaluation Board
지금 구매
Connectivity: USB 2.0: 4x Host, 1x OTG/Client, 10/100 Mbit Ethernet, 4x I2C, 4x SPI, 4x PWM, 4x ADC, 1x CAN, 6x Switches, 4x LEDs, up to 158 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4/5-wire Resistive Touch
Physical: 7-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 200 x 200 mm
-
수량>0
-
단가US$229.00
재고 있음
Small form-factor Pico-ITX Colibri Arm Computer Module family Carrier Board
Connectivity: USB 2.0: 1x Host/ 1x OTG, 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, up to 26 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 4/5-wire Resistive Touch
Physical: 6-27V DC Supply Voltage, 5V 5A, 3.3V 5A On-Board Power Supplies, Size: 100 x 72 mm
-
수량1-99>99
-
단가US$79.95
재고 있음
Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 35 GPIOs
Multimedia: 4-wire Resistive Touch
Physical: 5V DC +/- 5% Supply Voltage, 5V (External), 3.3V 3A On-Board Power Supplies, Size: 74 x 74 mm
-
수량1-99>99
-
단가US$33.60
재고 있음
Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 35 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch
Physical: 5V DC +/- 5% Supply Voltage, 5V (External), 3.3V 3A On-Board Power Supplies, Size: 74 x 74 mm
-
수량1-99>99
-
단가US$40.30
재고 있음
Small form-factor with header compatible with Arduino Uno and Raspberry Pi (RPi) maker boards
Connectivity: USB 2.0: 2x Host, 1x Client (Shared), 10/100 Mbit Ethernet, 1x I2C, 1x SPI, 4x PWM, 4x ADC, 1x (Available with Colibri VFxx and iMX) CAN, up to 3x LEDs, up to 39 GPIOs
Multimedia: Audio out: 1x (Stereo), Audio in: 1x (Stereo), 1x Camera Parallel Interface, 4-wire Resistive Touch
Physical: 5V DC +/- 5% Supply Voltage, 3.3V 3A On-Board Power Supplies, Size: 100 x 80 mm
-
수량>0
-
단가US$69.90
재고 있음
Resistive Touch Displays it for Apalis & Colibri modules
Touch: 4-Wire Resistive Touch. 40 pin FFC cable (250mm) to connect it with a Carrier Board. No special drivers required. -20° to 70° C Temp, Range. Size: 164.9 x 100.0 x 13.0 mm.
-
수량>0
-
단가US$100.00
재고 있음
LM816 USB WiFi for Apalis and Colibri Family
Plug and Play (Windows Compact Embedded 6/7 compatible). BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes. WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes. Can be setup as a ad-hoc network via peer to peer communications. -10° to 60° C Temp, Range. Size: 17 x 15 x 8 mm.
-
수량1-99>99
-
단가US$28.05
재고 있음
Analogue Camera Adapter for Apalis & Colibri modules
Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync. No external power supply required. Compatible with Colibri Evaluation Board and Apalis Evaluation Board. -10° to 60° C Temp, Range. Size: 60 x 50 x 9.4 mm.
-
수량>0
-
단가US$50.00
재고 있음