Colibri T20

The Colibri T20 is a SODIMM sized computer module based on the NVIDIA© Tegra 2 embedded system-on-a-chip. The Cortex A9 dual core CPU peaks at 1 GHz. The module delivers high CPU and graphic performance with minimum power consumption. The module also meets stringent industrial temperature range.

Colibri T20

The Colibri T20 product group is end-of-life (EOL). For further details please check the revision history of the product and the related PCN. Customers using end-of-life (EOL) Tegra products are advised to use our migration guide to seamlessly migrate to recommended hardware and software solutions for their products.
For a direct replacement, Toradex recommends the Colibri iMX6, Colibri iMX8 product group or a transition to the Verdin product family.

하이라이트

Powered by NVIDIA: Tegra 2 Dual Core Processor

The Colibri T20 is a SODIMM sized computer module based on the NVIDIA© Tegra 2 embedded system-on-a-chip. The Cortex A9 dual core CPU peaks at 1 GHz. The module delivers high CPU and graphic performance with minimum power consumption. The module also meets stringent industrial temperature range.

Designed in Switzerland. Made in Germany.

The integrated NVIDIA Graphics enables visually rich, smooth and fast user interfaces.

Supreme Graphics Performance for Demanding Applications

The module targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment System, POS, Data Acquisition, Thin Clients, Robotics, Gaming and much more

It offers a wide range of interfaces from simple GPIOs, industry standard I2C and SPI buses through to high speed USB 2.0 interfaces and a high speed memory bus. The HDMI interface makes it very easy to connect large, full HD resolution displays.

Easy Performance Upgrade

Existing customers will benefit from an extremely easy migration path from the current Colibri PXAxxx module range to the Colibri T20 – all Colibri modules are electrically pin compatible. New customers will also appreciate the ability to select the Colibri module most suitable for their application to achieve the optimum price/performance balance without the need to support different carrier board designs.

Latest Information on Colibri T20

You can find the latest information on Colibri T20 at the Toradex Developer Center

Toradex Developer Center

운영 체제

Toradex offers free support and maintenance for Windows Embedded Compact and Embedded Linux on the NVIDIA Tegra 2 processor based Colibri T20 SoMs. This allows system designers to focus the application only, instead of focusing also on the OS and low-level device drivers. Other OS such as Android will be supported by our partners.


Linux

Embedded Linux

Toradex carries out in-house development and maintenance of a Yocto project-compatible production-quality Embedded Linux BSP. Our extensive documentation and support makes sure your product reaches market in time. Full source code and Toradex developments are up-streamed into mainline.

For general information about the advantages and features, check our Embedded Linux page.

Get Started


Windows

Windows Embedded Compact

Windows Embedded Compact 7 and 2013 are supported on Colibri T20. The development and maintenance is carried out in-house by Toradex. WEC allows you to use Microsoft .Net Compact Framework and Visual Studio.

The price of the Colibri T20 modules includes a runtime license for Windows Embedded Compact 2013 Entry (C13Entry) which is backward compatible to earlier Windows CE versions.

For general information about advantages and features, check our Windows Embedded Compact page.

Get Started


Android

Android

Android on Colibri T20 is supported by our service partner Antmicro.

An Android demo image for Colbiri and Apalis T20 by Antmicro is available here.

Get Started


캐리어 보드

캐리어 보드는 CoM에 필요한 신호 및 전력 수준을 제공합니다. 또한 USB, 이더넷, UART 및 HDMI와 같은 응용 프로그램별 연결 및 멀티미디어 인터페이스를 제공합니다.

SBC와 캐리어 보드에 대해 자세히 알아보기

Colibri Evaluation Board

데이터 시트

Viola Carrier Board

Viola Datasheet

Colibri Partner Carrier Boards

Supported Modules
USB 2.0
Ethernet
External Bus
I2C
SPI
UART
IrDA
PWM
GPIO
Analog Input
SDIO/SD/MMC
CAN
JTAG
Entire Colibri Family
4x Host, 1x OTG/Client
10/100 Mbit
Up to 32 Bit
4x
4x
2x RS232, 1x RS422/485
1x
4x
up to 158
4x
1x 4 Bit
1x
Yes
Entire Colibri Family
1x Host / 1x OTG
10/100 Mbit
1x
1x
3x RS232
4x
up to 26
4x
1x 4 Bit (microSD)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
3x /
3x TTL
4x
up to 35
4x
1x 4 Bit (microSD)
1x (Available with Colibri VFxx and iMX)
Entire Colibri Family
2x Host, 1x Client (Shared)
10/100 Mbit
1x
1x
2x TTL, 1x USB-UART
4x
up to 39
4x
1x 4 Bit (SD/MMC)
1x (Available with Colibri VFxx and iMX)
Yes
Entire Colibri Family
up to 4x Host
up to 2x 10/100 MBit
1x
1x
1x RS-422, 1x RS-485
up to 4x
up to 24x
up to 4x
1x
Up to 2x
Switches
LEDs
6x
4x
up to 3x
LVDS
HDMI
VGA
RGB
Capacitive Touch Interface
Resistive Touch
Camera Parallel Interface
Analog Audio Line in
Analog Audio Mic in
Analog Audio Headphone out
1x Single Channel
1x (Through DVI-I connector)
1x
1x (18 Bit/24 Bit)
Adapter required
4/5-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x Dual Channel
1x (Through DVI-I connector)
1x (Through DVI-I connector)
1x (18 bit)
Yes
4/5-wire
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (18 bit)
Adapter required
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x (Shared with RGB)
1x (18 bit)
Yes
4-wire
1x
1x (Stereo)
1x (Mono)
1x (Stereo)
1x
1x
1x
1x
projected capacitive touch via I2C
up to 4/5-wire
1x (Stereo)
1x (Mono)
1x (Stereo)
Type Specific Board Connector
USB-to-RS232 Transceiver
RTC on Board
Included Accessory
Altium CAE Data Freely Available
1x
1x
Mating Power Plug (for X33)
24-way FFC 100mm (for X6)
Yes
1x
Mating Power Plug (for X17)
24-way FFC 35mm (for X4)
Yes
1x (*Not Assembled) /
1x
Yes
Arduino UNO and Raspberry Pi B+
1x
1x
Yes
1x
Supply Voltage
On-Board Power Supplies
Size
Temperature
7-27V DC
5V 5A
3.3V 5A
200 x 200 mm
6-27V DC
5V 5A
3.3V 5A
100 x 72 mm
-20° to 85° C
5V DC +/- 5%
5V (External)
3.3V 3A
74 x 74 mm
-40° to 85° C
5V DC +/- 5%
3.3V 3A
100 x 80 mm
-25° to 85° C
5-36V DC
-40° to 85° C
사용 목적
가격
Minimum Product Commitment
For Evaluation/Development
1 : US$229.00
For End Products
1-99 : US$79.95
>99 : RFQ
2030
For End Products
1-99 : US$33.60
>99 : RFQ
2034+
For Evaluation/Development
1 : US$69.90

액세서리

Toradex는 최종 제품에 직접 사용할 수 있는 완제품 액세서리를 제공합니다. 이러한 액세서리 중 일부에 대한 설계 파일에는 조립 도면, 회로도 및 Altium 프로젝트가 포함되어 있습니다.
Toradex는 웹샵에 나열된 주변 기기를 테스트하고 카메라, 모뎀, 디스플레이, 센서 등의 공급업체와 직접 협력하여 Toradex SoM과의 통합을 가능한 쉽게 만듭니다.

개발자 센터에서 자세히 알아보기
Colibri Fasteners
  • 1 Fastener bag contains 100 Fasteners
Resistive Touch Display 7" Parallel
  • Touch: 4-Wire Resistive Touch
  • 40 pin FFC cable (250mm) to connect it with a Carrier Board
  • No special drivers required
Capacitive Touch Display 7" Parallel
  • 40 pin and 10 pin FFC cable (250mm) to connect it with a Carrier Board
  • Atmel touch driver
LM816 USB WiFi
  • Plug and Play (Windows Compact Embedded 6/7 compatible)
  • BPSK, QPSK, 16 QAM, 64 QAM, DBPSK, DQPSK, and CCK modulation schemes
  • WEP, TKIP, and AES, WPA, WPA2 hardware encryption Schemes
  • Can be setup as a ad-hoc network via peer to peer communications
Colibri HDMI Adapter
  • No external power supply required
Analogue Camera Adapter
  • Parallel data output format: 8-Bit Parallel ITU-R BT.656 with external HSync and VSync
  • No external power supply required
  • Compatible with Colibri Evaluation Board and Apalis Evaluation Board
Carrier Board Accessory Kit
  • Power Adapter: 12VDC 30W with international plugs
  • Compatible with: Apalis Evaluation Board, Ixora Carrier Board, Colibri Evaluation Board, Iris Carrier Board, Verdin Development Board, Dahlia Carrier Board
Have a Question?